Sepasoft 3.81.9 SP3 Release Notes
MES Platform 3.0 3.81.9SP1 Release Notes
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES 3.0 | Production | Creating new MES Event Scripts no longer have a dependency on the Vision Module. | Fixed |
| 3.81.9SP3 | MES 3.0 | Production | Using the Meantime Between Failures Analysis Data Points no longer immediately triggers an Exception. | Fixed |
| 3.81.9SP3 | MES 3.0 | Production | Scripting functions correctly register to designer if no visualization modules are installed. | Fixed |
| 3.81.9SP3 | MES 3.0 | Production | Prevent errors on ‘unable to remove tag collector values’ during data pruning for tag collectors that are not meant to collect data. | Fixed |
| 3.81.9SP3 | MES 3.0 | Production | Changed logging to prevent logs from being flooded on changelog import. | Fixed |
| 3.81.9SP3 | MES 3.0 | Production | MSSQL queries will now check if the user’s database table schemas use VARCHAR or NVARCHAR, preventing huge unneeded memory grants from forming. | Fixed |
| 3.81.9SP3 | MES 3.0 | Production | Add fallback logic that monitors all ignition tag subscriptions and unsubscribes anything left when the module shuts down to prevent an issue where a subscription remains after the module shuts down. | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | EBR now shows data for previous phases when looping through a unit procedure when that phase is idle. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed rare cases where unit allocation hangs in a loopback. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed an issue where the quantity for a unit procedure was not being handled correctly, resulting in an error in the logs. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed loopback allocation issue that can occur that causes the recipe to hang. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed an issue causing visual jittering in Batch Recipe Editor when a link causes a groups bounds to need to be recalculated. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed issue when an OR BEGIN follows an OR END and the left-hand step is never executed, the logic waits for the step to complete. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed a rare issue where a phase command and state have the same timestamp in the EBR and show in the incorrect order. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed issue when a batch is aborted or stopped the Allocate, Deallocate, Operation, Preallocate, Set Parameter, Timer, User Message, and Value Prompt phases may still be executed. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed batch EBR to handle active, pending, and executed phases that exist in a loopback. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Have an And Begin immediately before Or Begin now correctly throws a validation error. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Added dedicated thread for handling batch parameter tag changes to free up the ignition tag thread to prevent possible deadlock issues when a tag change triggers a batch parameter update. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Fixed issue where system parameters were not included in the EBR for pending steps even though includeSystemParameters was enabled. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Batch Event Scripts no longer show if the module is not installed. | Fixed |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Batch Esignature steps are rejected if any single party rejects. | Updated |
| 3.81.9SP3 | MES 3.0 | Batch Procedure | Changed to only include min and max parameter values if they were altered from the defaults. | Updaed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES 3.0 | OEE Downtime | The Standard Rate for Hour analysis data point will no longer calculate a rate that exceeds 100% of the maximum rate value. | Fixed |
| 3.81.9SP3 | MES 3.0 | OEE Downtime | Added property to Vision Time Chart to limit data refresh from incoming state changes. | Improved |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES 3.0 | Track & Trace | No updates for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES 3.0 | SPC | PERSPECTIVE- Dynamic filters work on Perspective SPC Controller. | Fixed |
| 3.81.9SP3 | MES 3.0 | SPC | SPC Analysis now shows the correct name in the MES Monitor. | Fixed |
| 3.81.9SP3 | MES 3.0 | SPC | MESSampleDefinition#getAllSampleLocationProperties results are now cached. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES 3.0 | Settings & Changeover | No updates for this module in this service pack. |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 SP3 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP3 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.9 SP2 Release Notes
MES Platform 3.0 3.81.9SP1 Release Notes
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES 3.0 | Production | Vision Schedule Viewer- Pasted schedule entries can overlap among other entries if Overlapping Enabled is true. | Bug |
| 3.81.9SP2 | MES 3.0 | Production | customPropertyValue is now shown correctly in the Vision components. | Fixed |
| 3.81.9SP2 | MES 3.0 | Production | The MES Object Selector will now respect the hide/show Equipment Path property. | Fixed |
| 3.81.9SP2 | MES 3.0 | Production | Fixed an issue where Null Pointer Exception is thrown when launching the designer if Perspective and Vision module are not installed. | Fixed |
| 3.81.9SP2 | MES 3.0 | Production | User source reference is now refreshed if connection is lost or it goes down. | Fixed |
| 3.81.9SP2 | MES 3.0 | Production | Fixed an issue on Perspective Schedule View where the item’s progress bar will overflow. | Fixed |
| 3.81.9SP2 | MES 3.0 | Production | MES Changelog Viewer no longer errors when trying to make an export. | Fixed |
| 3.81.9SP2 | MES 3.0 | Production | Sepasoft’s Service Level Agreement has been updated. | Updated |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES 3.0 | Batch Procedure | Fixed SubParameter grouping for Material_In, Material_Out, and Supplemental_Equipment sections of a batch BOM. | Fixed |
| 3.81.9SP2 | MES 3.0 | Batch Procedure | Prevent NullPointerException when calling system.mes.getRecipeEBR. | Fixed |
| 3.81.9SP2 | MES 3.0 | Batch Procedure | Add check to handle missing Unit_Quantity parameter which can be caused by not resaving recipes after upgrading. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES 3.0 | OEE Downtime | Equipment cannot be deleted when active Operations Definitions/Segments exist on it. | Fixed |
| 3.81.9SP2 | MES 3.0 | OEE Downtime | Shift times are now calculated using the java.time library provided by the JDK, ensuring recent contemporary real-life changes to DST are reflected in the software. | Fixed |
| 3.81.9SP2 | MES 3.0 | OEE Downtime | Added start and end date/time properties to enable the user to limit what is initially loaded in the component. | Improved |
| 3.81.9SP2 | MES 3.0 | OEE Downtime | PERSPECTIVE-The Perspective OEE Downtime Table will now split and revert events using the actual timestamps, not the raw timestamps. | Fixed |
| 3.81.9SP2 | MES 3.0 | OEE Downtime | PERSPECTIVE-The Unplanned Time Calculator now depends on the Short Stop calculator, rather than independently calculating it itself. | Fixed |
| 3.81.9SP2 | MES 3.0 | OEE Downtime | PERSPECTIVE-An Analysis warning message will now be returned if the analysis includes a downtime event that triggers an indeterminate shortstop. | Improved |
| 3.81.9SP2 | MES 3.0 | OEE Downtime | WARNING-The following datapoints may trigger an NPE if used in analysis: Equipment/Line/Meantime/Line MTBF, and Equipment/Meantime/Equipment MTBF. | WARNING |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES 3.0 | Track & Trace | No updates for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES 3.0 | SPC | system.mes.spc.sample.getSampleList(sampleFilter) now interpreted as the correct function call and error message logged if the incorrect arguments are provided. | Fixed |
| 3.81.9SP2 | MES 3.0 | SPC | Deleting a sample definition will remove all of its attached location complex property. | Fixed |
| 3.81.9SP2 | MES 3.0 | SPC | Schedule View Component – Fixed an issue where rescheduling an operation to another equipment by dragging a schedule entry onto another row will cause the entry to disappear. | Fixed |
| 3.81.9SP2 | MES 3.0 | SPC | PERPSPECTIVE-View breaks when loading an SPC Controller with bound filter values. | Fixed |
| 3.81.9SP2 | MES 3.0 | SPC | PERSPECTIVE-Added custom ‘Enterprise’ resource adaptor that is used when upgrading from Ignition 7 to Ignition 8. | Fixed |
| 3.81.9SP2 | MES 3.0 | SPC | PERSPECTIVE-Enable security settings for stored spc settings. | Added |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES 3.0 | Settings & Changeover | No updates for this module in this service pack. |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 SP2 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP2 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.9 SP1 Release Notes
MES Platform 3.0 3.81.9SP1 Release Notes
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES 3.0 | Production | PERSPECTIVE- Schedule Selector now displays the correct scheduled begin/end times. | Fixed |
| 3.81.9SP1 | MES 3.0 | Production | Switching between a tab containing work order table and other tabs in Vision client context fix. | Fixed |
| 3.81.9SP1 | MES 3.0 | Production | Corrected a syntax error when using Oracle as the database provider and getting Equipment Product Code possible filter values in the analysis selector for both Vision and Perspective. | Fixed |
| 3.81.9SP1 | MES 3.0 | Production | Prevented wide date range used in SQL query when looking for values when no values for that tag collector exist. | Fixed |
| 3.81.9SP1 | MES 3.0 | Production | The MES Analysis Table keeps the column size and sort order across refreshes. | Fixed |
| 3.81.9SP1 | MES 3.0 | Production | Fixed a regression introduced in the previous release that prevents deleting equipment modes or states from the GUI. The error would say a parent is required when removing the mode or state. | Fixed |
| 3.81.9SP1 | MES 3.0 | Production | Vision Equipment Manager no longer errors when trying to set Live Analysis data points over 1024 characters. | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES 3.0 | Batch Procedure | An issue where batch unit allocations can get stuck preventing batches from proceeding. | Fixed |
| 3.81.9SP1 | MES 3.0 | Batch Procedure | An issue where unit procedures are not waiting for allocation after a loopback. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES 3.0 | OEE Downtime | PERSPECTIVE-Perspective OEE Time chart: Added a “downtime equipment caused by” to the tooltip. | Added |
| 3.81.9SP1 | MES 3.0 | OEE Downtime | PERSPECTIVE-Renaming material in the Material Manager now renames it in the Operation. | Fixed |
| 3.81.9SP1 | MES 3.0 | OEE Downtime | PERSPECTIVE-The Perspective Work Order Table’s Materials Tree will now show descriptions for the tooltips when hovered over. | Improved |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES 3.0 | Track & Trace | No updates for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES 3.0 | SPC | SPC and Settings & Changeover Task Routing scripting functions in Perspective screens now correctly forward to correct Gateway. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES 3.0 | Settings & Changeover | PERSPECTIVE-Importing nested Recipes in the Perspective SCO Tree Editor no longer automatically throws an Exception. | Fixed |
| 3.81.9SP1 | MES 3.0 | Settings & Changeover | PERSPECTIVE-The Perspective SCO Tree Editor no longer loses nor changes input field focus during usage. | Fixed |
| 3.81.9SP1 | MES 3.0 | Settings & Changeover | PERSPECTIVE-Loading spinners have been added to the Perspective SCO Tree Editor for all actions involving saving MES Objects. This includes Recipe editing, Item Recipe editing, and Import/Export. | Improved |
| 3.81.9SP1 | MES 3.0 | Settings & Changeover | The MESRecipeSecurityValueProperty Database Table now has a Role column supporting 255 characters instead of 36. | Fixed |
| 3.81.9SP1 | MES 3.0 | Settings & Changeover | SCO Security checks will only check roles attached to the current user, rather than checking every single role in the system. | Improved |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES 3.0 | Document Management | PERSPECTIVE- Document viewer now uses all available space when used in a coordinate container. | Fixed |
| 3.81.9SP1 | MES 3.0 | Document Management | An issue preventing textarea fields from being resized horizontally in the Document Editor. | Fixed |
| 3.81.9SP1 | MES 3.0 | Document Management | An issue requiring enter key to sometimes be pressed twice when typing text in the Document Editor”. | Fixed |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | Business Connector and Web Services | Business Connector | Add 15-minute expiration logic onto BC Schema Parameter Cache to prevent unrestricted cache growth. | Fixed |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | Business Connector and Web Services | Web Services | SOAP Web Service Endpoints will no longer convert String inputs into other data types. | Fixed |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9SP1 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.9 Release Notes
MES Platform 3.0 3.81.9 Release Notes
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES 3.0 | Production | ENTERPRISE-Custom Property Value Change Event is added to object when a custom property and value are added using AbstractMESObject#addCustomProperty that accepts a value. This fixes an error where the custom property value would not synchronize when the custom property was first added. | Fixed |
| 3.81.9 | MES 3.0 | Production | ENTERPRISE-Enterprise changes to send cache expires after access instead of after writing, allowing a longer wait time for remote response. | Fixed |
| 3.81.9 | MES 3.0 | Production | Write/Parse Change Log data in a fixed locale to prevent issues exchanging change log data between gateways running different locales on the JVM. | Fixed |
| 3.81.9 | MES 3.0 | Production | Corrected an instance where if many changes are recorded for the same millisecond some change log rows would be ignored. | Fixed |
| 3.81.9 | MES 3.0 | Production | Corrected an instance where objects created before the ‘data retention’ cutoff would not sync. | Fixed |
| 3.81.9 | MES 3.0 | Production | Fixed a syntax error when upgrading to 3.81.9 using MySQL as a datasource provider. | Fixed |
| 3.81.9 | MES 3.0 | Production | SPC data upgraded from 2.0 to 3.0 will have a unique change sequence number assigned when upgrading to 3.81.9 to allow the required unique index to be created. | Fixed |
| 3.81.9 | MES 3.0 | Production | Fixed issue where MES object filter requires an object type in order to retrieve MES equipment objects based on object name pattern. | Fixed |
| 3.81.9 | MES 3.0 | Production | Modified the way that names are compared for validity against other objects in the same save list to be more performant with many items in the save list. | Fixed |
| 3.81.9 | MES 3.0 | Production | Corrected reference in Settings and Changeover that still referenced the old ‘MESChangeLog’ table instead of the new ‘MESDefinitionChangeLog’. | Fixed |
| 3.81.9 | MES 3.0 | Production | Prevent situations where a sample attribute tag collector that is not associated with an attribute logs errors about being unable to synchronize. | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES 3.0 | Batch Procedure | Fixed a number of issues with phase tags. Prevented phases from being modified if they are used in a batch in the batch queue. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES 3.0 | OEE Downtime | The Update Following checkbox has been repaired for the MES Value Editor. This checkbox appears when inserting new Equipment Count and Equipment Cycle Count entries. | Fixed |
| 3.81.9 | MES 3.0 | OEE Downtime | Fixed an issue where past restrictions were being incorrectly added to current schedules. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES 3.0 | Track & Trace | Added a new function to the MES Lot Filter that allows the date range filter to be less restrictive. The filter is accessed by calling MESLotFilter.setForceEnclosedDateRange(Boolean). If True, returned Lots must have began and ended in between the date ranges (inclusive). If False, returned Lots must have occurred at any time during the date range at some point. | Improved |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES 3.0 | SPC | PERSPECTIVE-Perspective SPC Chart control limit dialog functions again. | Fixed |
| 3.81.9 | MES 3.0 | SPC | Prevent situations where a sample attribute tag collector that is not associated with an attribute logs errors about being unable to synchronize. | Fixed |
| 3.81.9 | MES 3.0 | SPC | Control Limit tag collectors that are changed in the future will only apply to measurements taken after the Control Limit date of change. | Fixed |
| 3.81.9 | MES 3.0 | SPC | Table charts should zoom and un-zoom correctly with showTable. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES 3.0 | Settings & Changeover | Corrected reference in Settings and Changover that still referenced the old ‘MESChangeLog’ table instead of the new ‘MESDefinitionChangeLog’. | Fixed |
| 3.81.9 | MES 3.0 | Settings & Changeover | Fixed an issue where default recipe value, whose initialized value is null, becomes uneditable. | Fixed |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | Business Connector and Web Services | Business Connector | Corrected syntax that worked in Java 11 but no longer works in Java 17 used in BC Chart parameter building. | Fixed |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | Business Connector and Web Services | Web Services | Web Service providers now correctly show the providers name in running Gateway Scripts descriptions. | Fixed |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.9 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.8 SP6 Release Notes
MES Platform 3.0 3.81.8 SP6 Release Notes
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES 3.0 | Production | PERSPECTIVE- The perspective analysis selector now updates the permissions on the saved analysis based on new roles added to the logged in user. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Production | ENTERPRISE-Enterprise export no longer sticks while gathering changelog data. Export file is produced with correct objects. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Production | Equipment Shift tag collector no longer throws an error when the tag is set to null. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Production | Stream change log export to a file before download to allow larger exports. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Production | MES Script editors no longer have a dependency on Vision. | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES 3.0 | Batch Procedure | Fixed an issue causing “”Change Maximum Message Size”” dialog to sometimes incorrectly be displayed when saving or validating large recipes in the Batch Recipe Editor. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Batch Procedure | Reduce CPU cost of getting a batch parameter by its friendly name in a large collection. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Batch Procedure | EBR Viewer component no longer displays referenced parameters as “”null”” or the incorrect occurrence. All parameters except BEGIN_DATE_TIME use the last occurrence of the parameter. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Batch Procedure | Fixed an issue in EBR viewer where referenced system parameters would appear as blank in titles/details sections when includeSystemParameters is false. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Batch Procedure | Certain phase types that should not be included in EBR reports are now excluded. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Batch Procedure | EBR Viewer template string can use {first(PARAM_NAME)} or {last(PARAM_NAME)} to specify if the first or last occurrence of a parameter value should be used in the detail section. | Added |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES 3.0 | OEE Downtime | The Downtime Detection Mode: Key Reason (Cell Priority) will no longer ignore Unexpected Blocked and Unexpected Starved states for Lines. | Fixed |
| 3.81.8 SP6 | MES 3.0 | OEE Downtime | Splitting downtime that crosses non-production modes no longer causes the event to mistakenly end on the wrong state. | Fixed |
| 3.81.8 SP6 | MES 3.0 | OEE Downtime | Reverting a split downtime that originally crossed non-production modes will no longer destroy a portion of the downtime history. | Fixed |
| 3.81.8 SP6 | MES 3.0 | OEE Downtime | Schedule View components onSave() event no longer saves changes before script fires. | Fixed |
| 3.81.8 SP6 | MES 3.0 | OEE Downtime | PERSPECTIVE-Reduced Perspective OEE Downtime Table data refreshes when unrelated equipment states change. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES 3.0 | Track & Trace | Perspective Trace Graph now correctly shows lots that are currently active. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Track & Trace | MES Lot Selector no longer clears itself when typing fast. | Fixed |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES 3.0 | SPC | SPC Attribute Samples now have functions that retrieve their values with number formatting applied. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES 3.0 | Settings & Changeover | Deleting equipment form the Production Model will now also clean them up in the Perspective (SCO) Settings Tree Editor. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Settings & Changeover | The Perspective Equipment Manager will now include Default Values for SCO Setpoint Export CSVs. Legacy CSVs can still be imported, however, the Default Value information will be missing. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Settings & Changeover | The Perspective (SCO) Settings Tree editor will now apply Equipment binding changes to Descendant Recipes. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Settings & Changeover | Setting a Path (SCO) Recipe Value in script that matches the default setpoint value will now generate an override. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Settings & Changeover | The Perspective (SCO) Settings Tree Editor will now respect Setpoint Sort Order values. | Fixed |
| 3.81.8 SP6 | MES 3.0 | Settings & Changeover | If the Perspective Equipment Manager is used to import SCO Setpoint values, and the Data Type information is not included, the system will attempt to determine the Data Type based on the Tag Path binding. | Improved |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP6 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.8 SP5 Release Notes
MES Platform 3.0 3.81.8 SP5 Release Notes
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP5 | MES 3.0 | Production | Perspective | SPC Prevented huge line of threads from building up whenever the system restarts with an active Perspective SPC Controller/Chart | Fixed |
| 3.81.8 SP5 | MES 3.0 | Production | Recipe | The SCO Changelog will now attempt to find users by Username and ID | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP5 | MES 3.0 | Batch Procedure | Fixed issue preventing “Force Complete Step” button from appearing for Equipment phase steps in Batch Controller | FIXED |
| 3.81.8 SP5 | MES 3.0 | Batch Procedure | Prevent duplicate recording of the ‘record last value’ batch parameters on the procedure when a unit procedure is aborted | FIXED |
| 3.81.8 SP5 | MES 3.0 | Batch Procedure | Changed synchronization manager requested parameter not found exception logging to require setting the BatchSynchronizeAction logger to Debug | UPDATED |
| 3.81.8 SP5 | MES 3.0 | Batch Procedure | Perspective | Fixed an issue causing some component styles to be incorrect in certain cases | FIXED |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP5 | MES 3.0 | OEE Downtime | Fixed an issue where Perspective dialog action buttons cannot be clicked on mobile devices | FIXED |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP5 | MES 3.0 | Track & Trace | MESResponseSegment.setSupplementalEquipment now correctly sets the supplemental equipment | FIXED |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP5 | MES 3.0 | SPC | Added new script functions to the Signal Evaluated event to be able to get sample UUID, attribute name, sample definition name and signal name | IMPROVED |
| 3.81.8 SP5 | MES 3.0 | SPC | P, U, C, NP charts show sample attributes | FIXED |
| 3.81.8 SP5 | MES 3.0 | SPC | Fixed regression where when filtering analysis on SPC Additional Factors no results would be returned | FIXED |
| 3.81.8 SP5 | MES 3.0 | SPC | Table charts should stick to right edge if already there when data comes in | FIXED |
| 3.81.8 SP5 | MES 3.0 | SPC | Perspective | Bad UUID or null string in SPC sample definition name no longer causes a Perspective SPC Chart to go blank without an error. Correcting the name or UUID will automatically correct the other and display data. | FIXED |
Sepasoft Business Connector Suite
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP5 | Business Connector and Web Services | Web Services | The designated SOAP character encoding will be used on message bodies instead of the default encoding of the OS/Ignition.conf file declaration | Fixed |
MES Platform 3.0 3.81.8 SP4 Release Notes
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | Production | Improved handling of special characters in usernames for the MES User Source Profile. Prevent multiple appended deleted suffixes when the username contains special characters. Prevent being unable to lookup a user with special characters in username. | Fixed |
| 3.81.8 SP4 | MES 3.0 | Production | PERSPECTIVE-Perspective Schedule Viewer – Schedule items will add an ellipsis for any text overflow. | Fixed |
| 3.81.8 SP4 | MES 3.0 | Production | PERSPECTIVE-Data Retention settings will remove data older than the configured date for deleted equipment. | Fixed |
| 3.81.8 SP4 | MES 3.0 | Production | PERSPECTIVE-Key Reason (Cell-Priority) Cell Groups will handle Starves and Blocks correctly if there are more than 2 children. | Fixed |
Production Module: Enterprise Synchronization
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | Production | No updates for Enterprise for this module in this service pack. |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | Batch Procedure | No updates for this module in this service pack. |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | OEE Downtime | Perspective Time Chart & Schedule View – fixed an issue where a zero is visible. | Fixed |
| 3.81.8 SP4 | MES 3.0 | OEE Downtime | PERSPECTIVE-Perspective Work Order will retain its sorted state | Fixed |
| 3.81.8 SP4 | MES 3.0 | OEE Downtime | PERSPECTIVE-Added ability to customize checkboxStyle, dialogButtonUserStyle, dialogDividerStyle, and dialogTitleStyle on Material Manager. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | Track & Trace | No updates for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | SPC | SPC script functions will print relevant exception information to the gateway log. | Fixed |
| 3.81.8 SP4 | MES 3.0 | SPC | Equipment Shift now available in OEE or SPC. | Fixed |
| 3.81.8 SP4 | MES 3.0 | SPC | Sample Definition Manager refreshes UI settings on startup. | Fixed |
| 3.81.8 SP4 | MES 3.0 | SPC | Additional Factors are now correctly grouped with the sample measurement. | Fixed |
| 3.81.8 SP4 | MES 3.0 | SPC | PERSPECTIVE-SPC charts no longer occasionally show no data when they have data. | Fixed |
| 3.81.8 SP4 | MES 3.0 | SPC | PERSPECTIVE-No data to show issue on charts related to date parsing. | Fixed |
| 3.81.8 SP4 | MES 3.0 | SPC | PERSPECTIVE-MESResponseSegments / MESOperationsResponses that are no longer connected to each other can now be removed by data retention settings. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | Settings & Changeover | SCO Changelog Row Limits are now applied at the appropriate time during dataset building. | Fixed |
| 3.81.8 SP4 | MES 3.0 | Settings & Changeover | Overhauled SCO Changelog fetching to improve performance. | Improved |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. | Fixed |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | Business Connector and Web Services | Web Services | Numbers sent in with SOAP String inputs will now be received as unicode values instead of being mistyped as Numbers. | Fixed |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP4 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.8 SP3 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | Production | Perspective Material Manager- Tree Table properly updates when locale changes. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Production | New or Modified MES Work Order will properly update Perspective & Vision Work Order Table. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Production | Importing State Codes in one State Class will not interfere with available codes in an unrelated State Class. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Production | Child Equipment must not contain any active operations before deleting its parent. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Production | The OEE Downtime Table and MES Work Order table will no longer interrupt user input when data refreshes while in an edit view. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Production | Enhanced Equipment Downtime Analysis performance; repetitive queries now use Prepared Statements. | Improved |
Production Module: Enterprise Synchronization
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | Production | No updates for Enterprise for this module in this service pack. |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Full item path to validation messages so users can more easily identify steps that have validation errors. | Added |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Ability to use numeric comparison operators with Date data types in Transition Expressions. | Added |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Logic to validate number data types when setting parameter values. | Added |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Ability to sync the state to the command if the phase is set to PLI mode. | Added |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | An issue causing deleted Process Cells to appear as usable when creating a Batch in the Batch List. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | An issue causing document text on Document phases in the Batch Recipe Editor to sometimes not be saved. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Resolved issue where Batch scripts would sometimes not register on module startup | Fixed |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | The current step being prematurely ended during restart | Fixed |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | When using batch phases that have Material Properties, if the Preallocate property is false, the lot quantity will always use the ‘Actual_Quantity’ instead of using the max(Actual_Quantity, Target_Quantity) when the actual_quantity changes. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Fixed regression that prevented copying recipes or templates with system.mes.batch.copyRecipe and system.mes.batch.copyTemplate scripting functions. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Validation logic in Batch Recipe Editor to not allow usage of numeric comparison operators with non-numeric data types in Transition Expressions. | Improved |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Validation logic for date/time strings -If an incorrectly formatted date/time string is specified, the user will be given a clear message with the correct format. | Improved |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Accuracy of large numbers in Perspective UI by handling validation on the server for large number data types (Double, Float, Long) -Display an error in the UI when attempting to save a value that is out of range for number data types. | Improved |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | MESDocumentEditor to allow number data types to be attached to “text” input fields. | Improved |
| 3.81.8 SP3 | MES 3.0 | Batch Procedure | Document Viewer shows visual indicators on input fields when an error occurs while saving the provided value. | Improved |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | OEE Downtime | Analysis will no longer fail when querying Counter data for Oracle DB Users. | Fixed |
| 3.81.8 SP3 | MES 3.0 | OEE Downtime | Analysis will no longer fail when querying Differed State data for Oracle DB Users. | Fixed |
| 3.81.8 SP3 | MES 3.0 | OEE Downtime | Counters now record values at end of run. | Fixed |
| 3.81.8 SP3 | MES 3.0 | OEE Downtime | Performance for Downtime Analysis queries involving split Downtime events has been improved for all DB Vendors. | Improved |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | Track & Trace | Perspective Trace Graph will add an overflow ellipsis to the equipment name. | Fixed |
| 3.81.8 SP3 | MES 3.0 | Track & Trace | Enhanced Track and Trace database query performance. | Improved |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | SPC | Group getter from SampleLimitProperty. | Added |
| 3.81.8 SP3 | MES 3.0 | SPC | The SPC Shift Interval is now functional. | Fixed |
| 3.81.8 SP3 | MES 3.0 | SPC | Custom SPC Interval scripts will now appear in the Project Browser. | Fixed |
| 3.81.8 SP3 | MES 3.0 | SPC | Samples now record to correct Tag Collector Tables. | Fixed |
| 3.81.8 SP3 | MES 3.0 | SPC | Other and Target Control Limit types are no longer being evaluated as Lower. | Fixed |
| 3.81.8 SP3 | MES 3.0 | SPC | SPC Upgrades should now process Samples and Control Limits much faster than before. Development clocked 10x speed improvements, but this may vary by system specifications. | Improved |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | Settings & Changeover | Settings and Changeover – Recipe Names will auto trim | Fixed |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | Business Connector and Web Services | Business Connector | BC Charts with more than 1 Stateful RFM Node will no longer automatically fail. | Fixed |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP3 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.8 SP2 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | Production | MESScripts Object Events – Added Creation Event for every type of Equipment Object. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Production | MESScripts Object Events – Renamed Equipment to Supplemental Equipment. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Production | MES Scripts will no longer reset the selected script node. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Production | Vision Equipment Manager Save Button will lock to prevent duplicates. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Production | Perspective Equipment Manager – For any unresolved errors in the Equipment State Class Edit Page, the save will be disabled. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Production | PERSPECTIVE-Perspective Analysis Selector – Fix toolbarStyle behavior. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Production | Updated Software License Agreement. | Updated |
Production Module: Enterprise Synchronization
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | Production | No updates for Enterprise for this module in this service pack. |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | Batch Procedure | Prevent allocating another unit in the same unit class if a specific unit was specified in the Batch Queue Entry. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | OEE Downtime | Blocked-Mode Cell Groups now iterate their children in the correct order. | Fixed |
| 3.81.8 SP2 | MES 3.0 | OEE Downtime | Certain Starved/Blocked scenarios involving Cell Groups have been fixed. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | Track & Trace | The .recordOperation() function will now attempt to preserve previously recorded custom lot statuses if a new status is not manually passed in as an argument by the user. | Fixed |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | SPC | Prevented a Live Analysis and Scheduling deadlock that can rarely occur after upgrading Settings & Changeover. | Fixed |
| 3.81.8 SP2 | MES 3.0 | SPC | Equipment Manager – SPC Locations cannot be deleted while still assigned to sample definitions. | Fixed |
| 3.81.8 SP2 | MES 3.0 | SPC | PERSPECTIVE-SPC charts disappearing when loading data. | Fixed |
| 3.81.8 SP2 | MES 3.0 | SPC | PERSPECTIVE-Pareto chart responds to prop style changes again. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | Settings & Changeover | Parsing integers that incorrectly have a decimal point no longer throws an exception. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Settings & Changeover | Settings Changelog FromValue is populated if changed from script. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Settings & Changeover | Recipe’s Default Values can no longer be reverted if there is no value to revert to. | Fixed |
| 3.81.8 SP2 | MES 3.0 | Settings & Changeover | Prevented a Live Analysis and Scheduling deadlock that can rarely occur after upgrading Settings & Changeover. | Fixed |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP2 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.8 SP1 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | Production | No updates for Enterprise for this module in this service pack. |
Production Module: Enterprise Synchronization
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | Production | No updates for Enterprise for this module in this service pack. |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | Batch Procedure | Prevent allocating another unit in the same unit class if a specific unit was specified in the Batch Queue Entry. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | OEE Downtime | No updates for Enterprise for this module in this service pack. |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | Track & Trace | No updates for Enterprise for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | SPC | PERSPECTIVE-SPC charts disappearing when loading data. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | Settings & Changeover | No updates for this module in this service pack. |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 SP1 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.8 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-Confirmation dialog to prevent loss of unsaved changes to perspective components. | Added |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-SPC Charts no longer mess up the MES Object Selector styling. | Fixed |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-Editing an inherited default setpoint definition on child equipment no longer damages the parent’s definition. | Fixed |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-Inherited default setpoint definitions can no longer have their names altered on child equipment. | Fixed |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-The SCO Variance Viewer has been implemented for Perspective. | New Feature |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-The Settings and Changeover Changelog Viewer has been implemented for Perspective. | New Feature |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-The Perspective Equipment Manager now handles default value assignments for Settings & Changeover Setpoint definitions, similar to the Vision Recipe Tree Editor. | New Feature |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-The Perspective Equipment Manager now handles Settings & Changeover setpoint security definitions, similarly to the Vision Recipe Tree Editor. | New Feature |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-The Perspective Equipment Manager has a new “requireChangeNote” property. Setting this to true will require users to enter a change note (which will appear as an input field) in the Settings & Changeover Setpoint security editing view as well as the Settings & Changeover Setpoint definition editing view. An invalid change note will prevent saving. The Settings & Changeover Setpoint definition editing view will only ask for a Change Note if the default-value field is altered. | New Feature |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-The Settings & Changeover (Master/Descendant Recipe) Tree Editor has been implemented. | New Feature |
| 3.81.8 | MES 3.0 | Production | PERSPECTIVE-Added task routing functionality to Gateway scoped MES script functions. | Improved |
| 3.81.8 | MES 3.0 | Production | Made the Perspective Equipment Manager function in a task routing environment. | Improved |
Production Module: Enterprise Synchronization
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | Production | No updates for Enterprise for this module in this service pack. |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | Batch Procedure | Batch scripts are now only available if the module is installed. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | An issue in the Batch Recipe Editor that was preventing users from referencing parameters added to a Unit Procedure or Operation in a Transition expression. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | An issue causing incorrect logicOrder to be set on steps when using nested AND_BEGIN/END steps in a recipe. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue causing some dialogs and dropdowns to not be displayed in the “minimized” version of the Batch Message List component. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | An issue causing an exception to sometimes be thrown when restarting a Held Batch after restart. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue of phase UDT instances not being created when phase is added to parent Unit Class. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Batch recipe scripting methods which stated certain parameters were optional to be actually optional. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | IllegalArgumentException being thrown when Production is restarted before Preallocate Resources phase starts. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Transition expression grouping fixed for expressions like (Condition1 AND Condition2) OR (Condition1 AND Condition3). Expression grouping shows in Batch Monitor and Batch Controller. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue preventing recipes from being saved before paths are added on Set Parameter and Value Prompt phases. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | An issue causing some built-in enums to not be created on startup. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | getBatchBOM script function not reflecting values from setBatchBOM function immediately. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue when recording trace data with new Sub Parameters in an Operation. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | The issue of unit procedures not executing when they follow a Or Begin element. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue causing an incorrect default minValue to be set for Double and Float data type parameters on a BatchPhase when the user leaves them undefined. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | An issue causing units list to not update when selecting a different recipe. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue causing newly added sub-params able to be deleted in the BatchPhaseManager edit view. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue in Recipe Monitor causing Transition_Expression to sometimes show “Invalid parameter value”. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | setParamKind will not change the parameter kind after it has been created but will not throw an exception to keep existing scripts working. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue with synced parameters not being updated in phases when transitioning to running state. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue causing Operation parameters to not be able to be referenced from a different UP/operation. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue preventing steps from being able to be moved in Batch Recipe Monitor. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue causing colors/state from previously selected recipe to persist when changing to a different recipe in Batch Recipe Monitor | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue causing phases that are faulted to not be colored correctly in the Batch Recipe Monitor. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue causing users unable to set min/max value using the UI for date type params. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Lot availability status not being updated when zero lot quantity remains when using the recordOperation and modifyOperation script functions. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Issue preventing changing of the lot status once initially set using the recordOperation or modifyOperation script functions. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Prevent errors when auto creating supplemental equipment or manifests with system.mes.trace.recordOperation. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Added fix to return preallocated resources when completing an Equipment step before using any of the preallocated resources. | Fixed |
| 3.81.8 | MES 3.0 | Batch Procedure | Logic for reducing/simplifying Batch Parameter paths when viewed in the Batch Recipe Editor or Batch Recipe Monitor. | Improved |
| 3.81.8 | MES 3.0 | Batch Procedure | Recording trace information during a loopback if a phase has resource allocations. | Improved |
| 3.81.8 | MES 3.0 | Batch Procedure | Logic to prevent renaming/deleting of certain built-in enums. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Pre-allocation phase to work with the new data type of Material_In. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Unit_Quantity parameter to the unit procedure phase and consider its value during allocation. This solves the problem of receiving messages that units don’t have enough capacity messages. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Logic to check if stepNames in unitAssignments are valid stepNames in the recipe when creating a BatchQueueEntry using the “addEntry” script method. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | More recipe validation for the preallocate resources phase to prevent illegal use. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | A message will now be displayed on the Batch Unit Manager component when a process cell cannot be determined, due to multiple process cells, or if there are no process cells defined in the environment. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | EquipmentFilter property to BatchList and BatchSelector components. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | BOM capability for recipes and batches. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Sub-parameter viewing/editing capabilities to Batch components (Batch Phase Manager, Batch List, Batch Recipe Editor, Batch Controller, Batch Recipe Monitor). | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Ability to add an “”empty”” option to enum definitions. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Missing script documentation for enum script methods. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | getDefinition(String name) and getDefinitionLink(String name) script methods for more convenience. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | New data types for material and supplemental allocations and T&T integration. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “batchType” component property to control which “”batchType”” is returned in the BatchSelector list (Active or Executed). | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “maxResults” component property to limit number of batches that can be displayed in the BatchSelector. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “beginDateTime” component property to limit BatchSelector list to only include Executed batches that have a recently modified timestamp after the specified date/time. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “endDateTime” component property to limit BatchSelector list to only include Executed batches that have a recently modified timestamp before the specified date/time. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “placeholderText” component property to control the text displayed in the BatchSelector when the input field is empty. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “inputLabel” component property to specify the label text for the BatchSelector input field. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “system.mes.batch.queue.getExecutedBatchIDs” script method for getting a list of Batch IDs for batches that have already been executed and removed from the Batch Queue. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | “viewMode” property to BatchList component which is used to determine which mode to run the component in and determines which type of batches to display (Local or Remote). | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | ProcessCell dropdown to BatchList edit view to specify what processCell the batch should be created for. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Ability to create Batches from an Enterprise server to be synced down to a Site server. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Logic to show errors next to required fields if they are blank when saving on the BatchListEditView. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Logic to remember pageSize selection in the BatchList component. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | More default pageSize options to MESTreeTable. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Quantity check when Bypass_Quantity_Check is set to False. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Min/MaxValue values to getBatchBOM and getRecipeBOM script methods. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | Logic to enforce min/max value when setting values using setBatchBOM. | Added |
| 3.81.8 | MES 3.0 | Batch Procedure | To allow consuming lots with zero or negative quantity when using the recordOperation or modifyOperation script functions | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | autoCreateLot to a default value to True when using the recordOperation or modifyOperation script functions. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | To require Record_Trace to be set to True if a lot could not be assigned on the first attempt during preallocation. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | Default valueSource for Material_In/Out and Supplemental_Equipment sub-parameters. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | system.mes.batch.queue.setBatchBOM script method to throw an exception when attempting to change the value of param(s) that do not have a value source of “Recipe” or “Recipe and Execution”. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | setBatchBOM script method to ignore “None” values so current values are not overwritten. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | Lot_Equipment and Lot_Manifest sub-params to allow freeform entry. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | The starting width of Name & Value columns to 500px for Param Settings tables in BatchList and Recipe Editor components. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | Made it so OEE Material Manager is available to be used as a perspective component as long as one of OEE, Batch, or the Track&Trace modules is installed. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | Made it so the “Production Settings” view of the OEE Material Manager cannot be accessed if the OEE module is not installed. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | “Message too large” link to a permalink. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | Batch Recipe Monitor side panel so parameter names and their values are more easily distinguishable. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | Renamed getEnumOptionOrdinal script method to getOptionOrdinal to match other enum script methods. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | BatchSelector perspective component to use Autocomplete. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | Re-enabled ability to add multiple process cells. | Updated |
| 3.81.8 | MES 3.0 | Batch Procedure | “createEntry” script method, the “addEntry” method should be used instead. | Removed |
| 3.81.8 | MES 3.0 | Batch Procedure | BatchPhasterManager to always show the “expand” button for Phase Classes in the list. | Changed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | OEE Downtime | Issue preventing labels from displaying on MES Schedule View fields. | Fixed |
| 3.81.8 | MES 3.0 | OEE Downtime | PERSPECTIVE-Confirmation dialog to prevent loss of unsaved changes to perspective components. | Added |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | Track & Trace | Lot availability status not being updated when zero lot quantity remains when using the recordOperation and modifyOperation script functions. | Fixed |
| 3.81.8 | MES 3.0 | Track & Trace | Issue preventing changing of the lot status once initially set using the recordOperation or modifyOperation script functions. | Fixed |
| 3.81.8 | MES 3.0 | Track & Trace | Prevent errors when auto creating supplemental equipment or manifests with system.mes.trace.recordOperation. | Fixed |
| 3.81.8 | MES 3.0 | Track & Trace | Added fix to return preallocated resources when completing an Equipment step before using any of the preallocated resources. | Fixed |
| 3.81.8 | MES 3.0 | Track & Trace | To allow consuming lots with zero or negative quantity when using the recordOperation or modifyOperation script functions | Updated |
| 3.81.8 | MES 3.0 | Track & Trace | autoCreateLot to a default value to True when using the recordOperation or modifyOperation script functions. | Updated |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-Chart shows attributes and units on Y-Axis for C, NP, P, U, Median, XbarR, XbarS, Histogram, Box and Whisker, Process Cap, Process Perform, PCP, and Moving Range charts. | Fixed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-Date row is no longer shown when showTable is false. | Fixed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-Pareto chart reorders data after taking weight into account. | Fixed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-Look of Pareto chart, responsiveness to changing properties. | Fixed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-All charts have had flickering reduction, especially when it comes to automatically adding new data points. | Fixed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-User input control limit value does not clear if entered before changing date on Edit Control Limits for Perspective Charts. | Fixed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-SPC Charts no longer throw an error when pointed to a non-existent definition in Ignition designer. | Fixed |
| 3.81.8 | MES 3.0 | SPC | The SPC Individual Chart will no longer spawn Gateway warnings when it is open. | Fixed |
| 3.81.8 | MES 3.0 | SPC | Labels for Individual charts now correctly state Individual and XBar. | Fixed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-Property to toggle showing units on Y-Axis label for C, NP, P, U, Median, XbarR, XbarS, Histogram, Box and Whisker, Process Cap, Process Perform, PCP, and Moving Range charts. | Added |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-New styles for Perspective SPC Charts. | Added |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-XBar and XDBar rows to the table of XBar Chart. | Added |
| 3.81.8 | MES 3.0 | SPC | All Perspective charts format their data. | Added |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-Scroll bar when table is hidden, showing entire chart at once for C, NP, P, U, Median, XbarR, XbarS, Histogram, Box and Whisker, Process Cap, Process Perform, PCP, and Moving Range charts. | Removed |
| 3.81.8 | MES 3.0 | SPC | PERSPECTIVE-Properties on SPC Charts that did nothing. | Removed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | Settings & Changeover | No updates for this module in this service pack. |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.8 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.7 SP4 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | Production | Enterprise export only exports items under the specified path. | Fixed |
| 3.81.7 SP4 | MES 3.0 | Production | PERSPECTIVE-MES Perspective Timeline components (MES Schedule View and OEE Time Chart) will now display Dates that respect the current Session’s Time Zone ID and Locale settings. This also applies to tooltips and the Schedule View’s Editing views. | Fixed |
| 3.81.7 SP4 | MES 3.0 | Production | PERSPECTIVE-MES Table Components (OEE Downtime Table, MES Work Order Table, MES Analysis Table, and MES Schedule Selector Table), will now display Dates that respect the current Session’s Time Zone ID and Locale Settings. The (Document Editor Table was not included). | Fixed |
| 3.81.7 SP4 | MES 3.0 | Production | PERSPECTIVE-The OEE Downtime Table’s split view will now display Dates that respect the current Session’s Time Zone ID and Locale Settings. | Fixed |
| 3.81.7 SP4 | MES 3.0 | Production | PERSPECTIVE-The MES Work Order Table’s editing view has a Date picker that will adjust itself based on the Session Time Zone ID. | Fixed |
Production Module: Enterprise Synchronization
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | Production | No updates for Enterprise for this module in this service pack. |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | Batch Procedure | Fixed issues related to writing to read-only parameters set to OPC or Reference tag type. | Fixed |
| 3.81.7 SP4 | MES 3.0 | Batch Procedure | Fixed the issue of non-exposed parameters not being recorded to history when a phase is started. | Fixed |
| 3.81.7 SP4 | MES 3.0 | Batch Procedure | Fixed pending write timeouts associated with parameters set to OPC tag types. This usually happened with the Command_Number parameters being set to zero. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | OEE Downtime | Vision WorkOrder Table will retrieve the right row when sorted. | Fixed |
| 3.81.7 SP4 | MES 3.0 | OEE Downtime | The Perspective OEE Downtime Table’s Scroll Bar will no longer jump to the very top of the table every time a table refresh occurs. | Fixed |
| 3.81.7 SP4 | MES 3.0 | OEE Downtime | MES Live Analysis Data Points will be properly created to their datatype. | Fixed |
| 3.81.7 SP4 | MES 3.0 | OEE Downtime | OEE Downtime Table (vision and perspective) is now translated. | Fixed |
| 3.81.7 SP4 | MES 3.0 | OEE Downtime | PERSEPCTIVE-Loading long periods of data fix, added an aggregate view with a summary tooltip to the Perspective Time Chart. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | Track & Trace | Using a null User ID for Trace operations no longer causes an SQL syntax Exception. | Fixed |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | SPC | Vision Location Sample List no longer throws a Null Pointer Exception when filtering on a date range with no samples. | Fixed |
| 3.81.7 SP4 | MES 3.0 | SPC | Whitespaces will automatically be removed from the names of sample definitions and attributes. | Fixed |
| 3.81.7 SP4 | MES 3.0 | SPC | SPC Analysis error no longer appears in the log when not required. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | Settings & Changeover | Vision Multiple Recipe Editor: Fixed number formatting for recipe values. | Fixed |
| 3.81.7 SP4 | MES 3.0 | Settings & Changeover | Upgrading Settings & Changeover from Platform 2 no longer discards usernames in the changelog history. | Fixed |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP4 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.7 SP3 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | Production | No updates for this module in this service pack. |
Production Module: Enterprise Synchronization
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | Production | ENTERPRISE-Inactive Redundant Gateways show in the MES Monitor component. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Production | ENTERPRISE-Improved performance of determining where items need to be synced by returning early if all possible paths have been found. | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed an issue that sometimes caused a crash in the Recipe Editor when deleting a step from a recipe. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed NPE error that occurred during the execution of equipment phases and unit procedures steps. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Expanded checking of available Operation Templates to include any Operation Templates that are assigned to parent unit classes. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Corrected an issue when building Unit Procedure templates that Operation templates would be empty when first expanded. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed an issue with Batch Message List component where the wildcard character * in the equipmentFilter property did not behave as expected. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | The Batch scripting functions that take a searchPattern argument will now process wildcards correctly. The list of corrected functions are: – system.mes.batch.phase.getCount(parentLink, searchPattern) – system.mes.batch.queue.getEntries(pageNumber, pageSize, searchPattern) – system.mes.batch.recipe.getRecipeLinkList(parentLink, pageNumber, pageSize, searchPattern) – system.mes.batch.unit.getAllocationList(pageNumber, pageSize, searchPattern, includeAllocation, includeWaiting) – system.mes.batch.unitclass.getCount(parentLink, searchPattern) – system.mes.signature.getSignatureTemplateLinkList(pageNo, pageSize, searchPattern) | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed recipe validation of nested loopbacks. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed issue where Command_Number values are not being received by the PLC. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Upgraded GoJS to latest version (2.3.5), which includes major performance improvements when viewing large Batch recipes. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Improved efficiency of import for Batch recipes and templates. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed issue where parameters removed from phases are not removed when a recipe is saved. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed issue where parameter calculations that are defined in phases always show a validation error. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed issue where template parameters are not updated to match phase parameters when a template is saved. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed to allow Unit Procedures and Operations to be inside loopbacks. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Fixed blank Reference or OPC tag string values appearing as null. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | When validating a recipe that has ORs all paths will be evaluated to find an exit that there is at least one way the recipe can exit. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Can select subsets of MESObjectTypes to export without needing all referenced objects, for example, you can export Material Classes and Material Definitions without also needing to include Lines, Operation Definitions, and Operation Segments. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Additional Factor Descriptions now correctly upgrade when going from platform 2.0 to 3.0. | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Vision Value Editor can show counter values that are larger than the maximum value of an Integer (2,147,483,647). | Fixed |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Batch List and Batch Recipe Editor have a new property called ‘recipeClassFilter’ that can be used to restrict which recipes are shown. The property takes an array of different patterns. A string can be used that matches if the recipe contains that value (Example: ‘test’ would match ‘Test Recipe Class’ and ‘Recipe Test Class’). Wild cards * (0 or more characters) and ? (single character) can also be used for more control, but the recipe must match the pattern. (Example: ‘test*’ would only match ‘Test Recipe Class’ from the above example). | Added |
| 3.81.7 SP3 | MES 3.0 | Batch Procedure | Changed internal cache datatype for better performance on inserts. | Improvement |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | OEE Downtime | Reduced amount of Equipment objects that needed to be loaded on the Vision OEE Time Chart to increase performance. | Fixed |
| 3.81.7 SP3 | MES 3.0 | OEE Downtime | Perspective OEE Downtime Table properly works with the translation util. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | Track & Trace | No updates for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | SPC | Sample Approvals that occurred outside of an SPC Analysis’s date range will no longer be lost. | Fixed |
| 3.81.7 SP3 | MES 3.0 | SPC | Reduced unnecessary analysis key checks for 3.0 SPC upgrade. | Fixed |
| 3.81.7 SP3 | MES 3.0 | SPC | Special characters like & in SPC Sample Definition names will upgrade from 2.0 to 3.0 correctly. | Fixed |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | Settings & Changeover | No updates for this module in this service pack. |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | Business Connector and Web Services | Web Services | SOAP and RESTful URL copying will now have the correct port if connected using HTTPS/SSL (this requires the endpoints to have Redirect-to-SSL set to enabled). | Fixed |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP3 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.7 SP1 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES 3.0 | Production | Corrected a regression that prevented copying counters and additional factors from a 2.0 Gateway Backup to an empty database on 3.81.7. | Fixed |
| 3.81.7 SP1 | MES 3.0 | Production | Updated Ignition SDK to 8.1.26 and fixed compatibility issue that caused NoSuchMethodError on module startup in 8.1.26. | Fixed |
| 3.81.7 SP1 | MES 3.0 | Production | PERSPECTIVE-Perspective Work Order table does not reset material name when changing material. | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES 3.0 | Batch Procedure | No updates for this module in this service pack. |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES 3.0 | OEE Downtime | Locations are no longer reported in OEE Time Chart. | Fixed |
| 3.81.7 SP1 | MES 3.0 | OEE Downtime | Live Analysis Reject counter does not reset when using children infeed/outfeed for calculation. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES 3.0 | Track & Trace | system.mes.trace.deleteOperation() now correctly sets userid to null. | Fixed |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES 3.0 | SPC | No updates for this module in this service pack. |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES 3.0 | Settings & Changeover | Writing an empty String to a String-type recipe setpoint will no longer be converted into Null. | Fixed |
| 3.81.7 SP1 | MES 3.0 | Settings & Changeover | Writing blank setpoint values in script will cause fallback values to be used: Zero for numbers, False for bools, Epoch for Dates, and Empty Strings for strings. | Fixed |
| 3.81.7 SP1 | MES 3.0 | Settings & Changeover | For customers that were relying on the blank writes to go through, hidden _unsafe variants of the scripting functions .setPathDefaultValue(), .setPathRecipeValue(), and .setPathRecipeValues() have been implemented. | Feature |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | Business Connector and Web Services | Web Services | Remove brackets that are added to XML property names when using the REST action in Business Connector. | Fixed |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 SP1 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.81.7 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES 3.0 | Production | Prevent timeout when creating many batch queue entries that sync to another gateway. | Fixed |
| 3.81.7 | MES 3.0 | Production | Improved invalidation when removing Production equipment. | Fixed |
| 3.81.7 | MES 3.0 | Production | Fixed issue where Live Analysis cache was invalidated on equipment count tag change when the store rate is greater than 0. | Fixed |
| 3.81.7 | MES 3.0 | Production | Mark an object as modified when an artifact has the text change, this prevents an issue where a document might not have the artifact text updated if that was the only modification. | Fixed |
Batch Procedure Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES 3.0 | Batch Procedure | When adding entries to the batch queue, all validation is done before the object is saved to prevent saving an invalid control recipe. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | When a batch transition is skipped because it was previously evaluated before the module restarted, add a note in the Batch Monitor that it was not evaluated and color based on the previously evaluated result. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Fixed rerunning complete phases and phases staying held when holding and then restarting a recipe while ‘Remove Held Batches From Memory’ is True. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Replace the current MES Object Cache with a Guava Cache that uses soft references so MES Objects will be released from memory when required. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Issue where logs show updated parameter values each time the gateway is restarted. If there are any, they should only show the first time they are updated. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Disabled control recipes will not prevent a batch phase from being removed. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Issue where batch thread pool was not being shutdown if trial mode expires. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | On module restart, batch recipes will be updated to ‘Held’ at the database level to prevent recipes showing as ‘Running’ when they are actually ‘Held’. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Reload Batch Control Recipe and retry setting execution state if there is a CacheConflictException. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | When redundancy changes, the newly inactive server clears out any running batch recipes and the newly active server reloads active recipes in ‘HELD’ state | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Prevent timeout when creating many batch queue entries that sync to another gateway. | Fixed |
| 3.81.7 | MES 3.0 | Batch Procedure | Loopback validation checks to use links instead of the element order for greater reliability. | Improved |
| 3.81.7 | MES 3.0 | Batch Procedure | Improved throughput on synchronizing Batch Queue Entries by allowing parallel processes. | Improved |
| 3.81.7 | MES 3.0 | Batch Procedure | Removed some unnecessary calls from Enterprise syncing for Batch Recipes to improve performance. | Improved |
| 3.81.7 | MES 3.0 | Batch Procedure | The ability to adjust default batch thread pool settings in the Ignition.conf file. | Added |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES 3.0 | OEE Downtime | No updates for this module in this service pack. |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES 3.0 | Track & Trace | No updates for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES 3.0 | SPC | SPC Perspective Chart components not included in this release. | Updated |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES 3.0 | Settings & Changeover | No updates for this module in this service pack. |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | Business Connector and Web Services | Web Services | No updates for this module in this service pack. |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.81.7 | MES Utility | Production Simulator | No updates for this module in this service pack. |